Thursday, March 10, 2011

Week 1: It's Sew Basic & EBTKS Linky

Hey everyone! Welcome to the first session of "It's Sew basic with A Little Knick Knack and Twinkle Toes!" We're so excited you could join us today. Remember, this is a 3 week long session and will be here every Thursday. The last Thursday, we will have a linky open for you guys to link up your finished projects. Then, we'll choose not 1 winner, but 3! That's right! Since our last announcement, Dana from MADE has graciously offered to give two winners a pattern from her shop! If you haven't seen her mad sewing skills, check out her blog ASAP! We're thrilled she's jumped on board to sponsor this event. 

Now, I will turn the floor over to Tina, from Twinkle Toes
Twinkle Toes The Blog
She'll be posting her teaching on her blog as well. Check it out, be a follower--show the love! Now, get ready to sew!

Sew Basic Session #1: Fabric, Thread and Cutting


When starting to sew, it is important to get to know various types of fabric. Let’s get the textbook stuff out of the way first, shall we? I promise there won’t be a pop quiz!

Fabric can be made from natural fibers, synthetic (manmade), or a combination of both. Natural fabrics include cotton, silk, wool and linen. Synthetics include things like polyester, nylon and rayon.

The way that fabric is manufactured falls into one of two categories – woven and knit. Woven fabrics are made by weaving the threads together horizontally and vertically and don’t have much stretch. Denim, linen, corduroy and tweed are wovens. Knit fabrics have lots of stretch to them. (Think: t-shirts and sweatshirts.) These fabrics are made using the same stitches that are used when knitting a scarf. Sewing knit fabrics can be challenging because of their propensity to stretch, so it’s important to know exactly how to work with these
fabrics.

Ya still with me? Here are some basic terms to keep in mind.
Selvage Edge: The finished edge of the fabric that runs the length of the grain. This edge is usually white with the manufacturer’s name on it. It is woven tightly and won’t unravel.
Grain: Threads that run parallel to the selvage edge.
Crossgrain: Threads that run across the width of the fabric.
Bias: Threads that run at a 45 degree angle to the grain. If you pull on the
bias, you will get the most stretch.


Let’s talk about thread. Selecting your thread for sewing is much more than simply making sure that the colors match or coordinate. Choosing the right thread can make or break your project. There are lots of resources out there to educate you on the gazillion types of threads, but for the purpose of this project, I’ll suggest that using a cotton or a cotton wrapped polyester thread in a size 50. Both are good for general sewing of light to medium weight fabric.

Now! On to the fun part!

Here’s what you’ll need to make your pillow case:

3/4 yard of cotton fabric
1/2 yard of coordinating cotton fabric
Sewing machine
Thread
Scissors
Straight pins
Rotary Cutter and Mat (optional but recommended)
Seam Ripper (a sewing girl’s BFF)
Ruler or tape measure

Ok, here we go. Are you ready?

The first step is easy.
Wash, dry and iron your fabric. It’s best to get any shrinking out of the way before you start sewing. Save yourself the disappointment of creating something you are proud of only to have it get all wonky after it comes out of the wash.

Now we’re going to cut into that lovely fabric. You’ve heard the saying, “Measure twice, cut once,” no? Let’s make sure that we do just that. Especially when working with expensive fabric. There’s nothing more frustrating than doing a hack job to your fabric because you didn’t measure correctly.

I recommend laying your fabric out onto a large table and marking your measurements with chalk or a fabric pencil. You can erase mistakes with a damp cloth if you need to start over.

We are going to cut two pieces of 19”x27” out of your large piece of fabric and two pieces of 6”x20” out of your small piece.

Lay your 3/4 yard piece of fabric out and fold in half, so that the selvage edges match up. If you’re using a rotary cutter and mat, here’s a great tutorial for getting started. If you are a beginner, you may want to practice using some old t-shirts before you cut into your pretty fabric.


Using your ruler and chalk, mark your fabric and cut. Open up the fold and cut so that you have two pieces measuring 19”x27”.


Now let’s get our other piece of fabric and cut out two 6”x20” pieces, just like we did above. But, let’s stop here for just one second. I matched my selvage edges up, but do you see how the top is uneven? That is because the fabric was not placed evenly onto the bolt by the manufacturer. Just make sure that you keep those selvage edges matched up and trim off the uneven.


There. That’s better.



Here are all my pieces.


That’s it! That wasn’t so bad, was it? In the next session, we’ll learn how to set up your machine and start constructing our pillow case.

Awesome! Isn't Tina a great teacher! I love that gal.

Now, on to Everything but the Kitchen Sink....where the rules are, there are no rules!

Have fun!



Also, don't forget to join the giveaway this week with Pink Lemonade! Ends Saturday night!

13 comments:

  1. awesome - I didn't know how to do that lining up thing...I've always just cut! this will be a really welcome series to get a better foundation! thanks!

    ReplyDelete
  2. Ooh good series. I am going to buy my fabric for the pillowcase tomorrow! And how sweet of Dana to sponsor some prizes as well!

    ReplyDelete
  3. This is great! My sister made some great pillowcases and I want to make some! These instructions are so clear. I will be following this so I can make myself some pillowcases as well. Thankyou!!!!

    ReplyDelete
  4. Great tutorial, even though I have a bunch of sewing books I've never learnt what the basics are, thanks for this, looking forward to next week!

    ReplyDelete
  5. Great tips for a beginner! I'm linking up this week! Thanks again, Meg for hosting!

    ReplyDelete
  6. Thanks for hosting! Those sewing tips are wonderful.

    ReplyDelete
  7. Very informative lesson - for anyone new to sewing - Meg. And that fabric is quite lively. I can't wait to see it as a finished project.

    Thanks for linking to the party. I would love to have you join me for "Funny Faux Pas Follies," as well. Click the party button in my sidebar for details.

    Blessings,
    Liz @ the Brambleberry Cottage
    http://thebrambleberrycottage.blogspot.com/

    ReplyDelete
  8. I love sewing tutorials...I love to see how others construct their items. I can always learn a tip or two.
    Thanks for hosting...I linked up again this week.
    xo,
    Sena

    ReplyDelete
  9. Meg hi - wow I am so glad I found your blog. Definitely wish I had a sewing machine. I keep telling myself that hand needle and thread is "old school." Anyway it's been working for me for a while now. But thank you for stopping by my blog and your kind comment. To answer your question, yes I did use mod podge to decoupage the map to the table top. I used a clear spray paint over layer on the entire table after the top was completely dry. Now, I need to go check out the great stuff linked up here! Thanks again :)

    ReplyDelete

I would love to hear from you!